FY16 Status Report on Development of Integrated EPP and SMT Design Methods

Jetter, R. I.¹  Sham, T. -L.²  Wang, Y.³ 

[1]R.I. Jetter Consulting, Pebble Beach, CA (United States)

[2]Argonne National Lab. (ANL), Argonne, IL (United States)

[3]Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

DOI  :  10.2172/1314086
RP-ID  :  ANL-ART--53
PID  :  OSTI ID: 1314086
Others  :  Other: 129466

学科分类：工程和技术（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

The goal of the Elastic-Perfectly Plastic (EPP) combined integrated creep-fatigue damage evaluation approach is to incorporate a Simplified Model Test (SMT) data based approach for creep-fatigue damage evaluation into the EPP methodology to avoid the separate evaluation of creep and fatigue damage and eliminate the requirement for stress classification in current methods; thus greatly simplifying evaluation of elevated temperature cyclic service. The EPP methodology is based on the idea that creep damage and strain accumulation can be bounded by a properly chosen ???pseudo??? yield strength used in an elastic-perfectly plastic analysis, thus avoiding the need for stress classification. The original SMT approach is based on the use of elastic analysis. The experimental data, cycles to failure, is correlated using the elastically calculated strain range in the test specimen and the corresponding component strain is also calculated elastically. The advantage of this approach is that it is no longer necessary to use the damage interaction, or D-diagram, because the damage due to the combined effects of creep and fatigue are accounted in the test data by means of a specimen that is designed to replicate or bound the stress and strain redistribution that occurs in actual components when loaded in the creep regime. The reference approach to combining the two methodologies and the corresponding uncertainties and validation plans are presented. Results from recent key feature tests are discussed to illustrate the applicability of the EPP methodology and the behavior of materials at elevated temperature when undergoing stress and strain redistribution due to plasticity and creep.