Analysis of the LSC microbunching instability in MaRIE linac reference design

Yampolsky, Nikolai¹ 

[1] Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

关键词: space charge;    microbunching instability;    electron accelerator;   

DOI  :  10.2172/1327984
RP-ID  :  LA--UR-16-27252
PID  :  OSTI ID: 1327984

学科分类：核物理和高能物理

美国|英语

来源: SciTech Connect

【 摘 要 】

In this report we estimate the effect of the microbunching instability in the MaRIE XFEL linac. The reference design for the linac is described in a separate report [1]. The parameters of the L1, L2, and L3 linacs as well as BC1 and BC2 bunch compressors were the same as in the referenced report. The beam dynamics was assumed to be linear along the accelerator (which is a reasonable assumption for estimating the effect of the microbunching instability). The parameters of the bunch also match the parameters described in [1]. Additionally it was assumed that the beam radius is equal to R = 100 m and does not change along linac. This assumption needs to be revisited at later studies. The beam dynamics during acceleration was accounted in the matrix formalism using a Matlab code. The input parameters for the linacs are: RF peak gradient, RF frequency, RF phase, linac length, and initial beam energy. The energy gain and the imposed chirp are calculated based on the RF parameters self-consistently. The bunch compressors are accounted in the matrix formalism as well. Each chicane is characterized by the beam energy and the R56 matrix element. It was confirmed that the linac and beam parameters described in [1] provide two-stage bunch compression with compression ratios of 10 and 20 resulting in the bunch of 3kA peak current.