Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al

JOURNAL OF ALLOYS AND COMPOUNDS

卷:661

Article

Chen, H.¹  Kauffmann, A.¹  Gorr, B.²  Schliephake, D.¹  Seemueller, C.¹  Wagner, J. N.¹  Christ, H. -J.²  Heilmaier, M.¹ 

[1] Karlsruhe Inst Technol, IAM WK, D-76131 Karlsruhe, Germany

[2] Univ Siegen, Inst Werkstofftech, D-57068 Siegen, Germany

关键词: High-entropy alloys;    Refractory metals;    Homogenization;    Deformation;    Secondary phases;   

DOI  :  10.1016/j.jallcom.2015.11.050

来源: Elsevier

【 摘 要 】

In the present investigation, we provide results on the casting, homogenization, and deformation behavior of a new Al-containing refractory high-entropy alloy, namely the equiatomic Nb-Mo-Cr-Ti-Al. The alloy shows a dendritic microstructure after arc melting. The dendrites completely dissolve due to a heat treatment at 1300 degrees C for 20 h. Besides a major phase in the form of a solid solution of W prototype structure, identified by X-ray diffraction (XRD) measurements as well as electron backscatter diffraction (EBSD), additional phases of small volume fraction within the grains and at the grain boundaries were observed. Quasistatic compression tests, performed between room temperature and 1200 degrees C, reveal sustaining and high yield strength up to 800 degrees C and an increasing ductility with increasing test temperature. The dominant deformation mechanism for quasistatic compression loading between 800 degrees C and 1200 degrees C is the < 111 > pencil glide of dislocations within the solid solution which was proven by the according fiber texture components, evolving during deformation. (C) 2015 Elsevier B.V. All rights reserved.

【 授权许可】

Free