Effect of non-magnetic and magnetic trivalent ion substitutions on BaM-ferrite properties synthesized by hydrothermal method

JOURNAL OF ALLOYS AND COMPOUNDS

卷:671

Article

Ben Ghzaiel, Tayssir^1,2  Dhaoui, Wadia¹  Pasko, Alexandre²  Mazaleyrat, Frederic² 

[1] Univ Tunis El Manar, Fac Sci Tunis, Unite Rech Chim Minerale Appl UR11ES18, Tunis 2092, Tunisia

[2] Univ Paris Saclay, CNRS, ENS Cachan, SATIE, 61 Av President Wilson, F-94230 Cachan, France

关键词: Magnetically ordered materials;    Crystal structure;    Magnetisation;    Magnetic measurement;    Scanning electron microscopy;    SEM;    X-ray diffraction;   

DOI  :  10.1016/j.jallcom.2016.02.071

来源: Elsevier

【 摘 要 】

Two species trivalent transition metal ions, nonmagnetic Al3+, Bi3+ and magnetic Cr3+, Mn3+ substituted barium hexaferrite powders are synthesised via dynamic hydrothermal method then calcinated at different temperatures. Powder XRD patterns analysis and Rietveld refinement indicate magnetoplumbite-type crystalline phase. The crystallite size calculated using Scherer's formula varies from 153 to 248 nm as it is affected by the ionic radius of trivalent metal ions and calcination temperatures. The morphological features show agglomerations of spherical-shaped particles with an average size of 400 +/- 50 nm for BaBiFe11O19 and hexagonal-shaped particles 1-2 mu m for the other substitutions. Magnetic studies show a ferromagnetic behaviour for all samples. The nonmagnetic Al3+, Bi3+ substituted materials have lower saturation magnetization (Ms) and remanence (Mr) than the magnetic substitutions Cr3+, Mn3+. These results reveal that Ms and Mr are related to the magnetic moment of each metallic ion and its distribution in the lattice. For magnetic substitution, Ms of manganese substitution (61.10 emu/g) is found higher than that of chromium (60.33 emu/g) since Mn3+ has a magnetic moment of 5 mu(B) greater than Cr3+ with 3 mu(B). Coercivity Hc and maximum energy product (BH)(max) determined from M-H loops exhibit an increasing trend with calcination temperature as they are related to the crystallite size. Hc and (BH)(max) of BaMnFe11O19 are found maximum 0.426 T and 7.47 kJ m(-3), respectively. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free