Elastic plastic deformation of TC6 titanium alloy analyzed by in-situ synchrotron based X-ray diffraction and microstructure based finite element modeling

JOURNAL OF ALLOYS AND COMPOUNDS

卷:688

Article

Shi, Ran^1,2  Nie, Zhihua²  Fan, Qunbo^1,2  Li, Guoju^1,2 

[1] Natl Key Lab Sci & Technol Mat Shock & Impact, Beijing 100081, Peoples R China

[2] Beijing Inst Technol, Sch Mat Sci & Engn, Beijing 100081, Peoples R China

关键词: Metals and alloys;    Mechanical properties;    Microstructure;    Computer simulations;    Synchrotron radiation;   

DOI  :  10.1016/j.jallcom.2016.07.105

来源: Elsevier

【 摘 要 】

The phase properties and distribution of multi-phase materials not only produce heterogeneous stress distributions between phases, but also stress gradients inside grains. However, due to limitations of stress/strain partitioning at the submicron scale, mechanical property characterizations of such alloys are typically based on evaluating averaged responses, e.g. macroscopic stress-strain curves. Here, the elastic plastic deformation of alpha/beta dual phase TC6 titanium alloy is investigated in depth on the microstructural level by a two dimensional microstructure based finite element method (FEM). In-situ synchrotron based X-ray diffraction was also used to characterize the lattice strain evolutions during deformation. The microscopic stress and strain evolutions were successfully tracked by FEM during the elastic plastic transition process. The alpha phase bears a relatively high stress compared to the beta phase during the elastic deformation stage. In the elastic to plastic deformation stage, a stress inversion phenomenon was observed in the microstructure by path tracing to elucidate the stress transfer process in detail. In the plastic deformation stage, strong plastic strain concentration occurs in the alpha phase near phase boundaries. The current local strains and stresses of alpha and beta phases are not synchronous with the applied macroscopic true strains and the corresponding constitutive stresses. Moreover, different current local strain rates produce obvious stress gradients inside the alpha grains. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free