Variational analysis for angle-ply laminates with matrix cracks

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

卷:51

Article

Huang, Z. Q.¹  Zhou, J. C.¹  He, X. Q.²  Liew, K. M.² 

[1] Wuhan Inst Technol, Sch Mech & Elect Engn, Wuhan 430073, Hubei, Peoples R China

[2] City Univ Hong Kong, Dept Civil & Architectural Engn, Hong Kong, Hong Kong, Peoples R China

关键词: Transverse cracking;    Angle-ply laminate;    Stiffness reduction;    Fiber orientation;   

DOI  :  10.1016/j.ijsolstr.2014.06.028

来源: Elsevier

【 摘 要 】

A stress-based variational model is developed to study stiffness reduction and stress distribution in angle-ply laminates [theta(2l)/theta(1m)/90(n)](s) with matrix cracks. The inter-laminar shear stresses between 90 degrees and theta(1)degrees-plies and between theta(1)degrees and theta(2)degrees-plies, respectively, are assumed to be in the form of general functions. The normal stresses sigma(x) in theta(1)degrees-plies and theta(2)degrees-plies are introduced with partition coefficient lambda for solving the problem of statically indeterminate boundary because the normal stresses sigma(x) cannot be obtained by using the condition of statics due to the loads at the boundary for each uncracked layer. This leads to expressions derived from equilibrium equations and boundary conditions for stress components in terms of the general functions and the partition coefficient. The governing equations for the general functions and the partition coefficient are derived by using a variational approach with the principle of minimum complementary energy. As an application, reduction of Young's modulus for different laminates is evaluated and compared with available experimental results. Distributions of in-planar and inter-laminar stresses are also presented by means of the finite difference method. The results show that the present approach is suitable to analyze stiffness reduction for multi-angle-ply laminates with transverse cracks in 90 degrees layer. (C) 2014 Elsevier Ltd. All rights reserved.

【 授权许可】

Free