Grain size effects in multiphase steels assisted by transformation-induced plasticity

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

卷:43

Article; Proceedings Paper

Turteltaub, S. ; Suiker, A. S. J.

关键词: size effects;    TRIP steel;    austenite;    martensitic phase transformation;    plasticity;   

DOI  :  10.1016/j.ijsolstr.2006.06.017

来源: Elsevier

【 摘 要 】

The influence of the austenitic grain size on the overall stress-strain behavior in a multiphase carbon steel is analyzed through three-dimensional finite element simulations. A recently developed multiscale martensitic transformation model is combined with a plasticity model to simulate the transformation-induced plasticity effects of a grain of retained austenite embedded in a ferrite-based matrix. Grain size effects are included via a surface energy term in the Helmholtz energy. Tensile simulations for representative orientations of the grain of retained austenite show that the initial stability of the austenite increases as the grain size decreases. Consequently, the effective strength is initially higher for smaller grains. The influence of the grain size on the evolution of the transformation process strongly depends on the grain orientation. For hard orientations, the transformation rate is higher for larger grains. In addition, the phase transformation is partially suppressed as the grain size decreases. In contrast, for soft orientations, the transformation rate is lower for larger grains. The phase transformation is more homogeneous for smaller grains and, consequently, the effective transformation strain is larger. Nevertheless, in multiphase carbon steels with a relatively low percentage of retained austenite, the influence of the austenitic grain size on the overall constitutive response is smaller than the influence of the austenitic grain orientation. (c) 2006 Elsevier Ltd. All rights reserved.

【 授权许可】

Free