Existence and uniqueness of attractors in frictional systems with uncoupled tangential displacements and normal tractions

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

卷:51

Article

Andersson, L-E¹  Barber, J. R.²  Ponter, A. R. S.³ 

[1] Linkoping Univ, Dept Math, SE-58183 Linkoping, Sweden

[2] Univ Michigan, Dept Mech Engn, Ann Arbor, MI 48109 USA

[3] Univ Leicester, Dept Engn, Leicester LE1 7RH, Leics, England

关键词: Contact problems;    Shakedown;    Melan's theorem;    Coulomb friction;    Attractors;   

DOI  :  10.1016/j.ijsolstr.2014.07.004

来源: Elsevier

【 摘 要 】

We consider the class of two or three-dimensional discrete contact problems in which a set of contact nodes can make frictional contact with a corresponding set of rigid obstacles. Such a system might result from a finite element discretization of an elastic contact problem after the application of standard static reduction operations. The Coulomb friction law requires that the tractions at any point on the contact boundary must lie within or on the surface of a 'friction cone', but the exact position of any 'stuck' node (i.e., a node where the tractions are strictly within the cone) depends on the initial conditions and/or the previous history of loading. If the long-term loading is periodic in time, we anticipate that the system will eventually approach a steady periodic cycle. Here we prove that if the elastic system is 'uncoupled', meaning that changes in slip displacements alone have no effect on the instantaneous normal contact reactions, the time-varying terms in this steady cycle are independent of initial conditions. In particular, we establish the existence of a unique 'permanent stick zone' T comprising the set of all nodes that do not slip after some finite number of cycles. We also prove that the tractions and slip velocities at all nodes not contained in T approach unique periodic functions of time, whereas the (time-invariant) slip displacements in T may depend on initial conditions. Typical examples of uncoupled systems include those where the contact surface is a plane of symmetry, or where the contacting bodies can be approximated locally as half spaces and Dundurs' mismatch parameter beta = 0. An important consequence of these results is that systems of this kind will exhibit damping characteristics that are independent of initial conditions. Also, the energy dissipated at each slipping node in the steady state is independent of initial conditions, so wear patterns and the incidence of fretting fatigue failure should also be so independent. (C) 2014 Elsevier Ltd. All rights reserved.

【 授权许可】

Free