Analysis of main parameters affecting substrate/mortar contact area through tridimensional laser scanner

JOURNAL OF COLLOID AND INTERFACE SCIENCE

卷:455

Article

Stolz, Carina M.¹  Masuero, Angela B.¹ 

[1] Univ Fed Rio Grande do Sul, Dept Civil Engn, BR-90035190 Porto Alegre, RS, Brazil

关键词: Wetting;    Interface;    Contact area;    Mortar;    Granulometric composition;    Sand;    Laser 3D scanner;    Application energy;   

DOI  :  10.1016/j.jcis.2015.05.028

来源: Elsevier

【 摘 要 】

This study assesses the influence of the granulometric composition of sand, application energy and the superficial tension of substrates on the contact area of rendering mortars. Three substrates with distinct wetting behaviors were selected and mortars were prepared with different sand compositions. Characterization tests were performed on fresh and hardened mortars, as well as the rheological characterization. Mortars were applied to substrates with two different energies. The interfacial area was then digitized with 3D scanner. Results show that variables are all of influence on the interfacial contact in the development area. Furthermore, 3D laser scanning proved to be a good method to contact area measurement. (C) 2015 Elsevier Inc. All rights reserved.

【 授权许可】

Free