Pyrolysis using microwave absorbents as reaction bed: An improved approach to transform used frying oil into biofuel product with desirable properties

JOURNAL OF CLEANER PRODUCTION

卷:147

Article

Lam, Su Shiung¹  Wan Mahari, Wan Adibah¹  Jusoh, Ahmad¹  Chong, Cheng Tung²  Lee, Chern Leing³  Chase, Howard A.⁴ 

[1] Univ Malaysia Terengganu, Sch Ocean Engn, Eastern Corridor Renewable Energy Grp ECRE, Kuala Terengganu 21030, Terengganu, Malaysia

[2] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia

[3] Monash Univ Malaysia, Chem Engn Discipline, Jalan Lagoon Selatan, Bandar Sunway 47500, Selangor, Malaysia

[4] Univ Cambridge, Dept Chem Engn & Biotechnol, New Museums Site, Pembroke St, Cambridge CB2 3RA, England

关键词: Pyrolysis;    Microwave;    Absorbent;    Oil;    Biofuel;    Cooking oil;   

DOI  :  10.1016/j.jclepro.2017.01.085

来源: Elsevier

【 摘 要 】

Used frying oil (UFO), a waste produced in large volume each year worldwide, represents a potential resource for biofuel production rather than a disposal problem for modern society. Pyrolysis technique using microwave heating offers a promising approach for the conversion of UFO into biofuel products with improved properties. In this study, pyrolysis of UFO was performed by contacting with a bed of microwave absorbents heated by microwave radiation. The pyrolysis approach was examined using different materials as the reaction bed, comprising particulate carbon, activated carbon and mesoporous aluminosilicate (MCM-41). The use of particulate and activated carbon as the reaction bed provided a fast heating rate and extensive cracking capacity to pyrolyze the used oil, thus showing favorable features that could lead to short process time and less energy usage. This resulted in a production of a high yield of a biofuel product (up to 73 wt%) in a process taking less than 35 min. The biofuel showed a composition dominated by light C-5-C-20 aliphatic hydrocarbons with low amounts of oxygenated compounds (<= 11%). In particular, the oil product obtained from activated carbon bed showed a low nitrogen content and was free of carboxylic acid and sulphur. The absence of carboxylic acids with low amounts of oxygenated compounds could reduce the formation of oxygenated by-products that could generate undesirable acidic tar or potentially hazardous sludge in the biofuel during storage. Combined with the detection of a high calorific value (46 MJ/kg) nearly comparable to diesel fuel, the biofuel shows great promise to be upgraded for use as a 'cleaner' fuel source with potentially reduced oxygenated byproducts plus low or zero emissions of NOX and SOX during the use of the fuel in combustion process. This study also revealed that the use of activated carbon bed results in the highest energy recovery (88-90%) from the used frying oil. Our results demonstrated that the use of a microwave-heated reaction bed of activated carbon shows great potential as an improved and sustainable pyrolysis approach that is energy-efficient and timesaving for the recycling of used frying oil into a biofuel product with desirable properties. This pyrolysis approach provides an alternative to transesterification that avoids the use of solvents and catalysts, and thus could be developed further as a promising route to recycle various types of waste and biomass materials. (C) 2017 Elsevier Ltd. All rights reserved.

【 授权许可】

Free