Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler

JOURNAL OF CLEANER PRODUCTION

卷:112

Article

Pasandin, Ana R.¹  Perez, Ignacio¹  Ramirez, Antonio²  Cano, Miguel M.² 

[1] Univ A Coruna, ETSI Caminos Canales & Puertos, La Coruna 15071, Spain

[2] Sacyr Construcc SA, Madrid, Spain

关键词: Paper industry waste;    Dregs;    Biomass fly ash;    Filler;    Hot-mix asphalt;    Water resistance;   

DOI  :  10.1016/j.jclepro.2015.06.016

来源: Elsevier

【 摘 要 】

Certain paper industry wastes display high recycling potential. In this investigation, the feasibility of using green liquor dregs and biomass fly ash from the paper industry as filler in hot-mix asphalt (HMA) for road pavement construction is analysed. Particularly, the moisture damage resistance (i.e., water sensitivity) of an AC 22 base B50/70 G has been studied using the Indirect Tensile Strength Test at the Marshall mix design optimum asphalt content. The most important filler properties have been determined to study water resistance: filler water content, grain size distribution using light scattering analysis techniques, morphology using a scanning electron microscope (SEM), chemical and mineralogical composition using X-ray fluorescence (XRF) and X-ray diffraction (XRD) techniques, detrimental fines content using the methylene blue test and the stiffening effect of the filler in the mastic by determining the ring and ball (R&B) softening temperature and the bitumen penetration grade. Additionally, the Rolling Bottle method and Boiling Water tests have been conducted to analyse the asphalt-aggregate bond. A control filler (i.e., commercial limestone filler) was used to compare the results. Also the mechanical properties (stiffness and resistance to the permanent deformation) of the mixtures were studied. As a result, it can be concluded that dregs have poor water resistance. Additionally, fly ash displayed inadequate water resistance for HMA. (C) 2015 Elsevier Ltd. All rights reserved.

【 授权许可】

Free