Improvement of oxygen diffusion characteristic in gas diffusion layer with planar-distributed wettability for polymer electrolyte fuel cell

JOURNAL OF POWER SOURCES

卷:271

Article

Koresawa, Ryo¹  Utaka, Yoshio² 

[1] Yokohama Natl Univ, Grad Sch Engn, Yokohama, Kanagawa 2408501, Japan

[2] Yokohama Natl Univ, Fac Engn, Yokohama, Kanagawa 2408501, Japan

关键词: Polymer electrolyte fuel cell;    Gas diffusion layer;    Wettability distribution;    X-ray computed tomography;    Oxygen diffusivity;    Galvanic cell oxygen absorber;   

DOI  :  10.1016/j.jpowsour.2014.05.151

来源: Elsevier

【 摘 要 】

Mass transfer characteristics of gas diffusion layer (GDL) are closely related to performance of polymer electrolyte fuel cells. Therefore, it is necessary to clarify the characteristics of water distribution relating to the microscopic conformation and oxygen diffusivity of GDL. A hybrid type carbon paper GDL with planar-distributed wettability is investigated for control of liquid water movement and distribution due to hydrophobic to hydrophilic areas that provide wettability differences in GDL and to achieve enhancement of both oxygen diffusion and moisture retention. Hybrid GDLs with different PTFE content were fabricated in an attempt to improve the oxygen diffusion characteristics. The effects of different PTFE contents on the oxygen diffusivity and water distribution were simultaneously measured and observed using galvanic cell oxygen absorber and X-ray radiography. The PTFE distribution was observed using scanning electron microscopy. The formation of oxygen diffusion paths was confirmed by X-ray radiography, where voids in the hybrid GDL were first formed in the hydrophobic regions and then spread to the untreated wetting region. Thus, the formation of oxygen diffusion paths enhanced the oxygen diffusion. In addition, the effects of local PTFE content in the hydrophobic region and the optimal amount of PTFE for hybrid GDL were elucidated. (C) 2014 Elsevier B.V. All rights reserved.

【 授权许可】

Free