Voltage equalization of an ultracapacitor module by cell grouping using number partitioning algorithm

JOURNAL OF POWER SOURCES

卷:301

Article

Oyarbide, E.¹  Bernal, C.¹  Molina, P.¹  Jimenez, L. A.²  Galvez, R.²  Martinez, A.¹ 

[1] Univ Zaragoza, Aragon Inst Engn Res, Zaragoza 50018, Spain

[2] Epic Power Converters, Zaragoza 50018, Spain

关键词: Ultracapacitor module;    Storage system;    Voltage balancing;    Partitioning algorithm;    Parallel-series connection;    Ageing;   

DOI  :  10.1016/j.jpowsour.2015.09.122

来源: Elsevier

【 摘 要 】

Ultracapacitors are low voltage devices and therefore, for practical applications, they need to be used in modules of series-connected cells. Because of the inherent manufacturing tolerance of the capacitance parameter of each cell, and as the maximum voltage value cannot be exceeded, the module requires inter-cell voltage equalization. If the intended application suffers repeated fast charging/discharging cycles, active equalization circuits must be rated to full power, and thus the module becomes expensive. Previous work shows that a series connection of several sets of paralleled ultracapacitors minimizes the dispersion of equivalent capacitance values, and also the voltage differences between capacitors. Thus the overall life expectancy is improved. This paper proposes a method to distribute ultracapacitors with a number partitioning-based strategy to reduce the dispersion between equivalent submodule capacitances. Thereafter, the total amount of stored energy and/or the life expectancy of the device can be considerably improved. (C) 2015 Elsevier B.V. All rights reserved.

【 授权许可】

Free