Modified electrochemical parameter estimation of NCR18650BD battery using implicit finite volume method

JOURNAL OF POWER SOURCES

卷:341

Article

Ashwin, T. R.¹  McGordon, A.¹  Widanage, W. D.¹  Jennings, P. A.¹ 

[1] Univ Warwick, WMG, Coventry CV4 7AL, W Midlands, England

关键词: Lithium-ion battery;    Electrochemical model;    Pseudo two dimensional model;    Parameter estimation;   

DOI  :  10.1016/j.jpowsour.2016.12.023

来源: Elsevier

【 摘 要 】

The Pseudo Two Dimensional (P2D) porous electrode model is less preferred for real time calculations due to the high computational expense and complexity in obtaining the wide range of electro-chemical parameters despite of its superior accuracy. This paper presents a finite volume based method for re-parametrising the P2D model for any cell chemistry with uncertainty in determining precise electrochemical parameters. The re-parametrisation is achieved by solving a quadratic form of the Butler-Volmer equation and modifying the anode open circuit voltage based on experimental values. Thus the only experimental result, needed to re-parametrise the cell, reduces to the measurement of discharge voltage for any C-rate. The proposed method is validated against the 1C discharge data and an actual drive cycle of a NCR18650BD battery with NCA chemistry when driving in an urban environment with frequent accelerations and regenerative braking events. The error limit of the present model is compared with the electro-chemical prediction of LiyCoO2 battery and found to be superior to the accuracy of the model presented in the literature. (C) 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

【 授权许可】

Free