Support effect of anode catalysts using an organic metal complex for fuel cells

JOURNAL OF POWER SOURCES

卷:185

Article

Oh, JunePyo¹  Yo, Eunjoo¹  Ono, Chisato²  Kizuka, Tokushi¹  Okada, Tatsuhiro²  Nakamura, Junji¹ 

[1] Univ Tsukuba, Grad Sch Pure & Appl Sci, Tsukuba, Ibaraki 3058573, Japan

[2] Natl Inst Adv Ind Sci & Technol, Tsukuba, Ibaraki 3058565, Japan

关键词: Carbon nanotube;    CO tolerance;    PEFC;    Anode catalyst;    Organic metal complex;   

DOI  :  10.1016/j.jpowsour.2008.08.064

来源: Elsevier

【 摘 要 】

The carbon support effect of Pt-Ni(mqph) electrocatalysts on the performance of CO tolerant anode catalysts for polymer electrolyte fuel cells (PEFCs) was investigated using carbon black and multi-walled carbon nanotubes (MWCNTs), with and without defect preparation. 20%Pt-Ni(mqph)/defect-free CNTs showed a very high CO tolerance (75% compared to the CO-free H-2 case) under 100 ppm CO level in the half-cell system of the hydrogen oxidation reaction. On the other hand, the hydrogen oxidation current on Pt-Ni(mqph)/defective CNTs, Pt-Ni(mqph)/Vulcan XC-72 R and Pt-Ru/VulcanXC-72R significantly decreased with increasing concentration of CO up to 100 ppm (25-47% compared to the CO-free H2 case). It is thus considered that the carbon support materials strongly affect the CO tolerance of anode catalysts. This is ascribed to a change in the electronic structure of the Pt particles due to the interaction with the graphene surface, leading to a reduction in the adsorption energy of CO. Ni(mqph) also mitigates CO poisoning due to its ability of CO coordination on Ni metal center. (C) 2008 Elsevier B.V. All rights reserved

【 授权许可】

Free