Characterization and electrochemical activities of nanostructured transition metal nitrides as cathode materials for lithium sulfur batteries

JOURNAL OF POWER SOURCES

卷:340

Article

Mosavati, Negar¹  Salley, Steven O.¹  Ng, K. Y. Simon¹ 

[1] Wayne State Univ, Dept Chem Engn & Mat Sci, Detroit, MI 48202 USA

关键词: Lithium sulfur battery;    Cathode material;    Tungsten nitride;    Molybdenum nitride;    Vanadium nitride;   

DOI  :  10.1016/j.jpowsour.2016.11.033

来源: Elsevier

【 摘 要 】

The Lithium Sulfur (Li-S) battery system is one of the most promising candidates for electric vehicle applications due to its higher energy density when compared to conventional lithium ion batteries. However, there are some challenges facing Li-S battery commercialization, such as: low active material utilization, high self-discharge rate, and high rate of capacity fade. In this work, a series of transition metal nitrides: Tungsten nitride (WN), Molybdenum Nitride (Mo2N), and Vanadium Nitride (VN) was investigated as cathode materials for lithium polysulfide conversion reactions. Capacities of 697, 569, and 264 mAh g(-1) were observed for WN, Mo2N VN, respectively, with 8 mg cm(-2) loading, after 100 cycles at a 0.1 C rate. WN higher electrochemical performance may be attributed to a strong reversible reaction between nitrides and polysulfide, which retains the sulfur species on the electrode surface, and minimizes the active material and surface area loss. X-ray photoelectron spectroscopy (XPS) analysis was performed to gain a better understanding of the mechanism underlying each metal nitride redox reactions. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free