Investigation of La1-xSmx-ySryCoO3-δ cathode for intermediate temperature solid oxide fuel cells

JOURNAL OF POWER SOURCES

卷:349

Article

Ni, Qing¹  Chen, Han¹  Ge, Lin¹  Yu, Shancheng¹  Guo, Lucun¹ 

[1] Nanjing Tech Univ, Coll Mat Sci & Engn, 5 Xinmofan Rd, Nanjing 210009, Jiangsu, Peoples R China

关键词: Solid oxide fuel cell;    Electrical conductivity;    Electrochemical performance;    Lanthanum strontium cobaltite;    Samarium strontium cobaltite;   

DOI  :  10.1016/j.jpowsour.2017.03.037

来源: Elsevier

【 摘 要 】

La1-xSmx-ySryCoO3-delta (LSSC; x = 0.475, 0.650, 0.825, y = 035, 0.40, 0.45) compounds, which have the same compositions as the La0.7Sr0.3CoO3-delta (LSC) and Sm0.5Sr0.5CoO3-delta (SSC) mixture (corresponding mole ratio is 3:1, 1:1 and 1:3, respectively), are synthesized through a conventional solid-state reaction and characterized by X-ray diffraction, thermal expansion coefficient, X-ray photoelectron spectrometer and electrical conductivity measurement, as well as the electrochemical impedance spectra and single cell performance measurement. Interestingly, the experimental results reveal that with the linear increase of y in LSSC, the conductivity of the corresponding samples does not alter linearly but reaches a peak when y = 0.35, namely, the maximum electrical conductivity enhancing from 2148 S cm-1 (LSC, y = 0.30) and 1802 S cm(-1) (SSC, y = 0.50) to 2750 S cm(-1) (y = 0.35). In addition, this turning point coincidently corresponds to the structure transition from hexagonal (y = 035) to orthorhombic (y = 0.40). Furthermore, comparing with LSC and SSC, the cathode polarization resistance (Rp) decreases by about 50% and 38%, respectively, after employing the LSSC (y = 0.40) compound as cathode at 800 degrees C and 0.21 atm p(O-2), which also leads to an increment of 49% and 31% respectively in peak power density. These results imply promising applications of such effective cathodes for intermediate temperature solid oxide fuel cells. (C) 2017 Elsevier B.V. All rights reserved.

【 授权许可】

Free