Application of backscatter electrons for large area imaging of cavities produced by neutron irradiation

JOURNAL OF NUCLEAR MATERIALS

卷:480

Article

Pastukhov, V. I.^1,2,3  Averin, S. A.^1,3  Panchenko, V. L.^1,3  Portnykh, I. A.¹  Freyer, P. D.⁴  Giannuzzi, L. A.⁵  Garner, F. A.^3,6,7 

[1] Joint Stock Co Inst Nucl Mat JSC INM, Zarechnyi, Sverdlovsk Regi, Russia

[2] Ural Fed Univ, Ekaterinburg, Russia

[3] Natl Res Nucl Univ, MEPhI Moscow Engn Phys Inst, Moscow, Russia

[4] Westinghouse Elect Co, Pittsburgh, PA USA

[5] LA Giannuzzi & Associates LLC, Ft Myers, FL USA

[6] Radiat Effects Consulting LLC, Richland, WA 99354 USA

[7] Texas A&M Univ, College Stn, TX USA

关键词: Void swelling;    Imaging;    Backscattered electrons;   

DOI  :  10.1016/j.jnucmat.2016.07.059

来源: Elsevier

【 摘 要 】

It is shown that with proper optimization, backscattered electrons in a scanning electron microscope can produce images of cavity distribution in austenitic steels over a large specimen surface for a depth of similar to 500-700 nm, eliminating the need for electropolishing or multiple specimen production. This technique is especially useful for quantifying cavity structures when the specimen is known or suspected to contain very heterogeneous distributions of cavities. Examples are shown for cold-worked ER-164, a very heterogeneously-swelling Russian fast reactor fuel cladding steel and also for AISI 304, a homogeneously-swelling Western steel used for major structural components of light water cooled reactors. This non-destructive overview method of quantifying cavity distribution can be used to direct the location and number of required focused ion beam prepared transmission electron microscopy specimens for examination of either neutron or ion-irradiated specimens. This technique can also be applied in stereo mode to quantify the depth dependence of cavity distributions. (C) 2016 Elsevier B.V. All rights reserved.

【 授权许可】

Free