SOLPS5 modelling of the type III ELMing H-mode on TCV

JOURNAL OF NUCLEAR MATERIALS

卷:363

Article; Proceedings Paper

Gulejova, B. ; Pitts, R. A. ; Wischmeier, M. ; Behn, R. ; Coster, D. ; Horacek, J. ; Marki, J.

关键词: B2-EIRENE;    TCV;    edge modelling;    SOL transport;    cross-field transport;    transport barrier;    ELM;   

DOI  :  10.1016/j.jnucmat.2007.01.263

来源: Elsevier

【 摘 要 】

Although ohmic H-modes have long been produced on TCV and the effects of ELMs at the divertor target studied in some detail, no attempt has yet been made to model the scrape-off layer (SOL) in these plasmas. This paper describes details of the first such efforts in which simulations of the inter-ELM phases using the coupled fluid-Monte Carlo SOLPS5 code (without drifts) are constrained by careful upstream Thomson scattering and Langmuir probe profiles. Simulated divertor profiles are compared with Langmuir probes and fast IR camera measurements at the targets. To account for the very differing transport rates in the edge pedestal and main SOL regions, radial variation of edge transport coefficients has been introduced in the simulations. Similarly, it is found that transport in the main chamber and divertor regions must be separately adjusted to provide an acceptable code-experiment match. (c) 2007 Elsevier B.V. All rights reserved.

【 授权许可】

Free