J-resistance curves for Inconel 690 and Incoloy 800 nuclear steam generators tubes at room temperature and at 300 °C

JOURNAL OF NUCLEAR MATERIALS

卷:486

Article

Bergant, Marcos A.¹  Yawny, Alejandro A.²  Perez Ipina, Juan E.^3,4 

[1] CNEA, Ctr Atom Bariloche, Gerencia CAREM, Av Bustillo 9500, RA-8400 San Carlos De Bariloche, Rio Negro, Argentina

[2] Consejo Nacl Invest Cient & Tecn, CNEA, Ctr Atom Bariloche, Div Fis Met, Av Bustillo 9500, RA-8400 San Carlos De Bariloche, Rio Negro, Argentina

[3] Univ Nacl Comahue, CONICET, Grp Mecan Fractura, RA-8300 Neuquen, Argentina

[4] Univ Nacl Comahue, CONICET, Grp Mecan Fractura, RA-1400 Buenos Aires, DF, Argentina

关键词: Fracture toughness;    J-resistance curve;    Non-standard specimens;    Steam generator tubes;    Inconel 690;    Incoloy 800;   

DOI  :  10.1016/j.jnucmat.2017.01.040

来源: Elsevier

【 摘 要 】

The structural integrity of steam generator tubes is a relevant issue concerning nuclear plant safety. In the present work, J-resistance curves of Inconel 690 and Incoloy 800 nuclear steam generator tubes with circumferential and longitudinal through wall cracks were obtained at room temperature and 300 degrees C using recently developed non-standard specimens' geometries. It was found that Incoloy 800 tubes exhibited higher Resistance curves than Inconel 690 for both crack orientations. For both materials, circumferential cracks resulted into higher fracture resistance than longitudinal cracks, indicating a certain degree of texture anisotropy introduced by the tube fabrication process. From a practical point of view, temperature effects have found to be negligible in all cases. The results obtained in the present work provide a general framework for further application to structural integrity assessments of cracked tubes in a variety of nuclear steam generator designs. (C) 2017 Elsevier B.V. All rights reserved.

【 授权许可】

Free