The flash effect in electronic conductors: The case of amorphous carbon fibers

SCRIPTA MATERIALIA

卷:179

Article

Neto, Rubens Roberto Ingraci^1,2  Raj, Rishi¹ 

[1] Univ Colorado, Dept Mech Engn, Boulder, CO 80309 USA

[2] Los Alamos Natl Lab, POB 1663, Los Alamos, NM 87545 USA

关键词: Flash sintering;    Carbon fibers;    Embrittlement;    Electroluminescence;   

DOI  :  10.1016/j.scriptamat.2020.01.003

来源: Elsevier

【 摘 要 】

Fibers of amorphous carbon are deployed as a model system to explore the incidence of flash in electronic conductors. The onset of flash is confirmed by a non-linear rise in conductivity and intense electroluminescence. The electroluminescence spectra are quite different from those seen in oxides. Flash causes a significant transformation of the amorphous carbon into graphite. However, flash also leads to embrittlement of the fibers presumably by the scission of covalent bonds. The fibers were heated with electrical current without using a furnace. The maximum temperature remained just below the melting point of platinum, the metal used for the electrodes. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

【 授权许可】

Free