Effects of molar expansion ratio of fuels on engine efficiency

FUEL

卷:263

Article

Duc-Khanh Nguyen¹  Szybist, James²  Sileghem, Louis¹  Verhelst, Sebastian^1,3 

[1] Univ Ghent, Dept Elect Energy Met Mech Construct & Syst, Ghent, Belgium

[2] Oak Ridge Natl Lab, Fuels Engines & Emiss Res Ctr, Oak Ridge, TN USA

[3] Lund Univ, Dept Energy Sci, Lund, Sweden

关键词: Molar expansion ratio;    Fuel properties;    Spark-ignition engines;    Energy losses;    Engine efficiency;   

DOI  :  10.1016/j.fuel.2019.116743

来源: Elsevier

【 摘 要 】

Fuel properties have a strong impact on the efficiency of internal combustion engines. Contrary to other physical and thermochemical fuel properties, the molar expansion ratio is normally ignored. Molar expansion ratio is the ratio of number of moles of the products to the reactants. In this work, the impact of the fuel's molar expansion ratio on engine efficiency is investigated. Findings are based on simulations of a spark ignition engine using different fuels (standard fuels and user-defined fuels) and different dilution ratios. Simulations without heat transfer and friction were performed first. The combustion then takes place at top dead center with a very short combustion duration to approach the ideal Otto cycle. The heat transfer and friction were then added step by step. From this analysis, it could be concluded that the heat loss and friction work decrease as molar expansion ratio increases. The gross indicated and brake thermal efficiencies thus increase. User-defined fuels with different molar expansion ratio, but the same physical and thermochemical properties were then employed. The simulated results showed that the brake thermal efficiency increases by around 1.15% with an increase in molar expansion ratio of 0.02 compared to a fuel with a molar expansion ratio of unity. The simulation was also done with air and exhaust gas recirculation dilution.

【 授权许可】

Free