Effects of intake flow and coolant temperature on the spatial fuel distribution in a direct-injection gasoline engine by PLIF technique

FUEL

卷:106

Article

Kim, S.^1,2  Yan, Y.¹  Nouri, J. M.¹  Arcoumanis, C.¹ 

[1] City Univ London, Sch Engn & Math Sci, Energy & Transport Res Ctr, London EC1V 0HB, England

[2] Silla Univ, Sch Engn, Pusan, South Korea

关键词: Multi-hole injector;    Fuel mixture distributions;    PLIF;    Coolant temperature;    Swirl and tumble motion;   

DOI  :  10.1016/j.fuel.2012.10.002

来源: Elsevier

【 摘 要 】

The spatial fuel distributions of the homogeneous and stratified charge of a high pressure 6-hole injector were examined in a single cylinder optical direct injection spark ignition (DISI) engine. The effects of in-cylinder charge motion, fuel injection pressure and coolant temperature were investigated using a planar laser induced fluorescence (PLIF) technique. It was found that in the case of homogeneous charge mode, early injection in the intake stroke generated similar fuel distributions at the crank angle of 12 degrees BTDC regardless of the in-cylinder air motion at the coolant temperature of 90 degrees C. In the case of stratified charge mode, the in-cylinder tumble flow played more effective role in mixture preparation than the swirl flow during the compression stroke; and the increase of the coolant temperature improved fuel evaporation; but the increase of the fuel supplying pressure could not change the pattern of the fuel vapour distribution against the expectation. (c) 2012 Elsevier Ltd. All rights reserved.

【 授权许可】

Free