期刊论文详细信息
FUEL 卷:102
Thermal decomposition of bio-oil: Focus on the products yields under different pyrolysis conditions
Article
Chhiti, Younes1  Salvador, Sylvain1  Commandre, Jean-Michel2  Broust, Francois2 
[1] Ecole Mines Albi Carmaux, Ctr RAPSODEE, FRE CNRS 3213, F-81013 Albi 09, France
[2] CIRAD, UR Biomasse Energie, F-34398 Montpellier 5, France
关键词: Bio-oil;    Pyrolysis;    Char;    Gas;    Tar;   
DOI  :  10.1016/j.fuel.2012.06.098
来源: Elsevier
PDF
【 摘 要 】

In this study, pyrolysis process of wood bio-oil was studied. The effects of temperature in the range 550-1000 degrees C, heating rate in the range 2-2000 degrees C s(-1) and ash content of the bio-oil on char, tar and gas yields were investigated. The main gas species generated are quantified by Micro-GC: H-2, CO, CO2, CH4 and trace amounts of C2H4 and C2H6. A temperature increase from 550 to 1000 degrees C enhanced greatly the gas yield, whilst solid and liquid yields decreased significantly. The heating rate was varied in a range covering rapid pyrolysis using the Horizontal Tubular Reactor (HTR) to flash pyrolysis using an Entrained Flow Reactor (EFR). A decrease of char yield from 11 wt.% down to 4 wt.% was observed when heating rate is changed from 2 to 100 degrees C s(-1). In EFR a flash heating rate of 2000 degrees C s(-1) led to a char yield as low as 1 wt.%. Bio-oil with a natural ash contents of 0.05 wt.% and bio-oil added with 3 wt.% of ash were finally pyrolyzed. Ash seems to favor re-polymerization reactions that lead to an increase in char yield. A decrease in the amount of gas is observed when ash is added while an increase was a priori expected. (C) 2012 Elsevier Ltd. All rights reserved.

【 授权许可】

Free   

【 预 览 】
附件列表
Files Size Format View
10_1016_j_fuel_2012_06_098.pdf 888KB PDF download
  文献评价指标  
  下载次数:1次 浏览次数:0次