Investigation of ignition process from visible to infrared by a high speed colour camera

FUEL

卷:185

Article

Wang, Y.¹  Zheng, L.¹  Woolley, R.¹  Zhang, Y.¹ 

[1] Univ Sheffield, Dept Mech Engn, Sir Frederick Mappin Bldg,Mappin St, Sheffield S1 3JD, S Yorkshire, England

关键词: Image enhancement;    Infrared emission;    Ignition process;    Flame colour;    Soot radiation;   

DOI  :  10.1016/j.fuel.2016.08.010

来源: Elsevier

【 摘 要 】

From the image processing of high speed colour images of flame ignition, areas of dominant infrared emission have been noticed, which has stimulated the more in depth investigation in this paper. Two test cases for propane and methane with co-flow air were carried out. By applying selective digital image enhancement technique, the weak chemiluminescence-induced visible flame and infrared signals are simultaneously resolved together with the much stronger visible soot radiation. It is found that the pockets of soot only emitting infrared signal exists in both propane and methane ignition process cases. In the ignition process, the chemiluminescence-induced blue flame is observed first, which is followed by soot only having infrared emission. The visible orange coloured sooty flame only appears afterwards. The soot only emitting infrared is found in between the blue flame and the visible sooty flame. The co-flow air is found to accelerate the ignition process and it also brings forward soot formation. The investigation demonstrates that a proper image enhancement technique is essential in the further understanding of combustion process taking place when using a high speed camera. (C) 2016 Elsevier Ltd. All rights reserved.

【 授权许可】

Free