Anthracite briquettes with plant byproducts as an ecofriendly fuel for foundries

FUEL

卷:175

Article

Noh, Young Dong^1,2  Komarneni, Sridhar^1,2  Cannon, Fred S.³  Brown, Nicole R.⁴  Katsuki, Hiroaki⁵ 

[1] Penn State Univ, Dept Ecosyst Sci & Management, University Pk, PA 16802 USA

[2] Penn State Univ, Mat Res Inst, University Pk, PA 16802 USA

[3] Penn State Univ, Dept Civil & Environm Engn, University Pk, PA 16802 USA

[4] Penn State Univ, Ag & Bio Engn, University Pk, PA 16802 USA

[5] Saga Ceram Res Lab, 3037-7 Arita Machi, Saga 8440024, Japan

关键词: Anthracite coal fines;    Rice hull;    Rice hull ash;    Lignin;    Cupola furnace;    Foundry fuel;   

DOI  :  10.1016/j.fuel.2016.02.049

来源: Elsevier

【 摘 要 】

Anthracite briquettes were developed using mainly waste anthracite fines, plant byproducts of rice hulls and rice hull ash and silicon metal powder as an ecofriendly fuel and as an alternative to conventional coke used in a cupola furnace. Si metal powder reacts with anthracite to form SiC, which provides high mechanical strength to an anthracite briquette when it is exposed to a high temperature in the cupola furnace. Rice hull and rice hull ash, which are agricultural byproducts with high SiO2 content were investigated as partial substitutes for silicon as the former are inexpensive relative to silicon metal. The formation of SiC was investigated under different conditions using X-ray diffraction and transmission electron microscopy. In addition, unconfined compressive strength of the briquettes was measured when the rice hull or ash substituted Si powder partially or completely. When anthracite briquettes prepared with elemental Si powder and either rice hull ash or rice hull powder were pyrolyzed at 1400 degrees C for 2 h, SiC formed and the briquettes showed high mechanical strength in the range of 2000-4000 kPa, which is enough to keep their structural integrity in a cupola furnace. (C) 2016 Elsevier Ltd. All rights reserved.

【 授权许可】

Free