High-pressure ignition delay time measurements of a four-component gasoline surrogate and its high-level blends with ethanol and methyl acetate

FUEL

卷:275

Article

Cooper, Sean P.¹  Mathieu, Olivier¹  Schoegl, Ingmar²  Petersen, Eric L.¹ 

[1] Texas A&M Univ, J Mike Walker Dept Mech Engn 66, 3123 TAMU, College Stn, TX 77845 USA

[2] Louisiana State Univ, Dept Mech & Ind Engn, 3261 Patrick F Taylor Hall, Baton Rouge, LA 70803 USA

关键词: Gasoline surrogate;    Chemical Kinetics;    Ignition delay time;    High pressure;    Shock tube;   

DOI  :  10.1016/j.fuel.2020.118016

来源: Elsevier

【 摘 要 】

Ignition delay times of a gasoline surrogate (iso-octane/toluene/n-heptane/1-hexene at 55/25/15/5% by liquid volume, developed in McCormick et al. 2017) with high-level bioblendstock-gasoline surrogate blends (50% and 85% biofuel by liquid volume of each ethanol and methyl acetate) were collected behind reflected shock waves. Post-reflected-shock temperatures ranged from 968 to 1361 K at pressures of about 4, 10, 25, and 50 atm. Data were collected for real fuel-air mixtures at fuel lean and stoichiometric conditions (f = 0.5, 1.0) with focus on the more-practical, fuel-lean conditions. Ignition delay times were measured from OH* chemiluminescence around 307 nm using an endwall diagnostic. The RON and MON of the surrogate were 90.3 and 84.7, respectively. Ethanol was chosen due to its wide use in flex-fuel vehicles and availability, while also providing an increased octane rating. Methyl acetate was chosen for its especially high octane rating to investigate the effect of an extreme case. To validate the gasoline surrogate, the data are compared to real gasoline (RD387) and several gasoline surrogate experiments from the literature. Using the wide range of pressures studied, the gasoline surrogate's pressure dependence was quantified to account for test-to-test variations using regression analysis. Similarly, a global correlation for gasoline and its surrogates was developed using all available data from the literature. Two modern chemical kinetics models targeting gasoline and its surrogates are compared to the ignition delay time measurements. These new high-pressure, high-bioblendstock concentration tests provide required chemical kinetic data for optimizing fuel and engine design.

【 授权许可】

Free