Energy analysis and surrogate modeling for the green methanol production under dynamic operating conditions

FUEL

卷:307

Article

Cui, Xiaoti¹  Kaer, Soren Knudsen^1,2  Nielsen, Mads Pagh¹ 

[1] Aalborg Univ, Dept Energy, Pontoppidanstr 111, DK-9220 Aalborg, Denmark

[2] REintegrate ApS, Langerak 15, DK-9220 Aalborg, Denmark

关键词: Dynamic simulation;    CO2 hydrogenation;    Power-to-methanol;    Methanol synthesis;    Methanol distillation;    Nonlinear autoregressive exogenous model;   

DOI  :  10.1016/j.fuel.2021.121924

来源: Elsevier

【 摘 要 】

Green methanol production, based on intermittent renewable energy sources, requires a more flexible operation mode and close integration with other sections, such as, the electrical grid and electrolysis processes. In this study, methanol synthesis and distillation processes (MSD) for pilot-scale green methanol production (corresponding to 22,236 tons/year) were investigated by dynamic modeling, focusing on energy analysis and dynamic characteristics during load change (LC) operations. The dynamic simulation results with a ramp rate of 50% load / h indicated energy efficiencies of 87.7% (at full-load) and 90.2% (at half-load) for the methanol synthesis process, 86.8% (full-load) and 82.4% (half-load) for the methanol distillation process, and 77.1% (full-load) and 75.4% (half-load) for the MSD process. Relatively small fluctuations were achieved with a ramp time of 1 h for the LC operations. Based on the constructed dynamic model, a surrogate modeling for the MSD process was conducted using the nonlinear autoregressive exogenous model (NARX) model, which exhibited good accuracy with the evaluated performance for the testing data of the root-mean-square error (RMSE) = 3.09 x 10(-5), mean absolute error (MAE) = 2.30 x 10(-4), and R-2 = 1.0. The constructed NARX model can be further integrated with models for other sections of the power-to-methanol process.

【 授权许可】

Free