Influence of In and Ga additives onto SnO2 inkjet-printed semiconductor

THIN SOLID FILMS

卷:553

Article; Proceedings Paper

Vila, A.¹  Gomez, A.¹  Portilla, L.¹  Morante, J. R.^1,2 

[1] Univ Barcelona, Elect Dept M2E IN2UB, E-08028 Barcelona, Spain

[2] Inst Recerca Energia Catalunya, E-08930 St Adria De Besos, Spain

关键词: Inkjet;    SnO2;    Additives;    In;    Ga;    TFT;    Thin-film transistor;   

DOI  :  10.1016/j.tsf.2013.12.044

来源: Elsevier

【 摘 要 】

Tin oxide is a multifunctional semiconductor that offers excellent capabilities in a variety of applications such as solar cells, catalysis and chemical sensors. In this work, tin-based semiconductors have been obtained by means of solution synthesis and inkjet, and compared to similar materials with In and Ga as additives. The effect of different thermal treatments after deposition is also studied. n-Type behavior with saturation mobility >2 cm(2)/Vs has been observed, and suitability as a semiconductor for thin-film transistors (TFTs) demonstrated with on/off ratios of more than 8 decades. Both In and In-Ga additives are shown to provide superior environmental stability, as well as significant change from depletion to enhancement operation modes in TFTs. (C) 2013 Elsevier B. V. All rights reserved.

【 授权许可】

Free