Characterization of SixOyNz coating on CF/PPS composites for space applications

SURFACE & COATINGS TECHNOLOGY

卷:335

Article

Cintra, Maria Paula de O. C.¹  Santos, Alberto L.¹  Silva, Patricia²  Ueda, Mario³  Janke, Andreas⁴  Jehnichen, Dieter⁴  Simon, Frank⁴  Botelho, Edson C.¹ 

[1] Univ Estadual Paulista UNESP, Sch Engn, Mat & Technol Dept, Guaratingueta, Brazil

[2] INPE, Associated Sensors Lab, Sao Jose Dos Campos, Brazil

[3] INPE, Associated Plasma Lab, Sao Jose Dos Campos, Brazil

[4] Leibniz Inst Polymer Res Dresden, Dresden, Germany

关键词: Advanced composites;    Silicon oxynitride;    Spatial environment;    Plasma enhanced chemical vapor deposition;    Plasma immersion ion implantation;   

DOI  :  10.1016/j.surfcoat.2017.12.036

来源: Elsevier

【 摘 要 】

This work deals with the processing and surface treatment of thermoplastic composites carbon fibers/Polyphenylene sulfide (CF/PPS) for aerospace applications. After the production of the thermoplastic composites through hot compression molding, a silicon deposition was carried out on its surface using Plasma Enhanced Chemical Vapor Deposition (PECVD). Then, the Plasma Immersion Ion Implantation (PIII) process was executed on the silicon coated samples to create an amorphous silicon nitride layer. Subsequently, the coated and uncoated samples were characterized by means of the following techniques: optical microscopy, atomic force microscopy (AFM), X-ray diffraction (XRD) and X-ray excited photoelectron spectroscopy (XPS). By analyzing all the results obtained from the characterizations, it was concluded that a layer of amorphous silicon oxynitride was generated on the CF/PPS composite without damaging it. This result is an innovative step concerning the application of this material in a space environment (low earth orbit).

【 授权许可】

Free