Experimental and numerical investigation on coupled motion characteristics of a tunnel element suspended from a twin-barge

OCEAN ENGINEERING

卷:153

Article

Yang, Can¹  Weller, Sam D.²  Wang, Yong-xue¹  Ning, De-zhi¹  Johanning, Lars^1,2 

[1] Dalian Univ Technol, State Key Lab Coastal & Offshore Engn, Dalian 116024, Peoples R China

[2] Univ Exeter, Coll Engn Math & Phys Sci, Penryn Campus, Penryn TR10 9FE, Cornwall, England

关键词: Immersed tunnel;    Coupled response;    Regular waves;    Twin-barge;    Mooring system;    Installation procedure;   

DOI  :  10.1016/j.oceaneng.2018.01.112

来源: Elsevier

【 摘 要 】

The coupled motion characteristics of a tunnel element, which is suspended from a twin-barge and moored to the seabed during the installation process, has been investigated using a 1:50 scaled model. Response characteristics are obtained for multiple regular wave conditions and three different immersion depths. Experimental investigation includes studies to identify system properties of individual arrangements (tunnel, twin-barge) and for the coupled tunnel & twin-barge configuration. Investigation of motion characteristics includes i) experimental studies of the tunnel element from a fixed suspension point and barge, ii) experimental studies with and without a mooring arrangement from the tunnel element to the seabed, iii) experimental study of the fully coupled tunnel & twin-barge configuration, and iv) numerical investigation of the fully coupled tunnel & twin-barge configuration using a commercial fully dynamic mooring simulation software (OrcaElexTm). The experimental investigations were carried out in the State Key Laboratory of Coastal and Offshore Engineering at Dalian University of Technology (DUT), using the ' 6-D Measurement System' (6D-UMS) to obtain six degree of motions for both the tunnel and twin-barge. For the numerical study hydrodynamic properties were obtained from the diffraction/radiation potential code WAMIT for simplified tunnel and twin-barge elements and used to derive fully coupled motion behavior using the time-domain mooring simulation software OrcaFlex (TM). The results are presented in order to provide insights into the motion characteristics for the different configurations studied. The main findings indicate that the sway and roll motions for the coupled tunnel & twin-barge configuration decrease with increasing wave incidence angle and immersion depths. The use of additional mooring lines to restrain the tunnel element to the seabed played a further role in reducing the motions of the tunnel element, particularly when subjected to large amplitude and long period waves.

【 授权许可】

Free