Two measurement modes for mobile phone optical sensing

SENSORS AND ACTUATORS B-CHEMICAL

卷:195

Article

Eriksson, Mats¹  Iqbal, Zafar¹ 

[1] Linkoping Univ, Dept Phys Chem & Biol, SE-58183 Linkoping, Sweden

关键词: Mobile phone;    Optical sensor;    Refractive index;    Liquids;    Absorption;   

DOI  :  10.1016/j.snb.2014.01.005

来源: Elsevier

【 摘 要 】

The use of a mobile phone for classification and quantification of liquid samples is described. The screen of the phone is used for controlled illumination and the front side camera for imaging. No additional optical equipment is needed. It is shown that there are different regions of the captured image containing different information about the sample. One region contains light that has been specular reflected at the air-liquid interface and one is dominated by light that has propagated through the liquid. The specular reflected light contains information about the refractive index of the liquid sample whereas the transmitted light contains information about color and absorption. It is found that the specular reflectance increases linearly with increasing refractive index, n, in the range 1.33 < n < 1.38, as expected from the Fresnel equations. A change of the refractive index of about 0.004 refractive units can be detected. The transmitted light intensity is well described by the Beer-Lambert law over a large absorption range. Light from the two different areas of the image is used to analyze several types of liquid samples. It is shown that a combination of the two measurement modes improves the classification abilities of the mobile phone. (C) 2014 Elsevier B.V. All rights reserved.

【 授权许可】

Free