cleanroom-free and scalable manufacturing technology for the microfluidic generation of lipid-stabilized droplets and cell-sized multisomes

SENSORS AND ACTUATORS B-CHEMICAL

卷:267

Article

Trantidou, Tatiana¹  Regoutz, Anna²  Voon, Xian N.¹  Payne, David J.²  Ces, Oscar^1,3 

[1] Imperial Coll London, Dept Chem, Exhibit Rd, South Kensington SW7 2AZ, England

[2] Imperial Coll London, Dept Mat, Exhibit Rd, South Kensington SW7 2AZ, England

[3] Imperial Coll London, Inst Chem Biol, Exhibit Rd, South Kensington SW7 2AZ, England

关键词: Droplet microfluidics;    Artificial cells;    Lipid droplets;    Double emulsions;    Rapid prototyping;    Scalable manufacturing;   

DOI  :  10.1016/j.snb.2018.03.165

来源: Elsevier

【 摘 要 】

There is a growing demand to construct artificial biomimetic structures from the bottom-up using simple chemical components in a controlled and high-throughput way. These cell mimics are encapsulated by lipid membranes and can reconstitute biological machinery within them. To date, such synthetic cells based upon droplet microfluidics are fabricated using non-scalable, expensive and time-consuming strategies, and are thus restricted to small-scale in-house manufacturing. Here, we report a cleanroom-free and highly scalable microfluidic manufacturing technology based on dry film resists and multilayer lamination. The technology facilitates the controlled and high-throughput generation of stable and monodisperse droplets using anionic surfactants and more biologically relevant phospholipids. We demonstrate the versatility of this approach by selectively patterning the surface chemistry of the device, enabling the production of compartmentalized lipid structures based on droplet interface bilayers (multisomes). This technology has the potential to simultaneously unlock the widespread exploitation of microfluidics to chemists and synthetic biologists not having access to controlled production environments and facilitate low-cost (<1) pound high-volume fabrication of self-contained disposable devices with minimum feature sizes of 30 mu m. The associated material and equipment costs approach those of other deskilled prototyping technologies, such as 3D printing that have made the transition into the mainstream. (C) 2018 The Authors. Published by Elsevier B.V.

【 授权许可】

Free