Amperometric detection of hydrogen peroxide at a Prussian Blue-modified FTO electrode

SENSORS AND ACTUATORS B-CHEMICAL

卷:108

Article; Proceedings Paper

Tseng, KS ; Chen, LC ; Ho, KC

关键词: FTO;    hydrogen peroxide;    modified electrode;    Prussian blue;    H2O2 sensor;   

DOI  :  10.1016/j.snb.2004.12.031

来源: Elsevier

【 摘 要 】

This research focuses on the use of a Prussian Blue (PB)-modified optically transparent electrode for sensing hydrogen peroxide (H2O2). The PB thin films were deposited galvanostatically onto F-doped tin oxide (FTO) glass substrates. Then a reliable and reproducible detection was achieved by exerting a constant bias of -0.2 V (versus Ag/AgCl/saturated KCl) at the PB-modified FTO electrode immersed in an H2O2 solution containing 0.1 M KCl, pH 2. The dynamic range of detection was found to lie between 50 mu M and 50 mM, and the sensitivity was ca. 58.1 mA/cm(2) M. But it was also observed that the dissolved oxygen interfered the H2O2 sensing. Better sensing results could be obtained if the solution was pre-purged with N-2. To sum up, this study possesses the potential to eliminate the use of costly platinum or glassy carbon in a PB-based H2O2 sensor and may provide the basis for optical sensing. (c) 2004 Elsevier B.V. All rights reserved.

【 授权许可】

Free