Measuring the heat transfer coefficient (HTC) in buildings: A stakeholder's survey

RENEWABLE & SUSTAINABLE ENERGY REVIEWS

卷:144

Article

Deb, C.¹  Gelder, L. V.²  Spiekman, M.³  Pandraud, Guillaume⁴  Jack, R.⁵  Fitton, R.⁶ 

[1] Swiss Fed Inst Technol, Inst Technol Architecture, Zurich, Switzerland

[2] Belgian Construct Certificat Assoc BCCA, Bldg Performances, Brussels, Belgium

[3] TNO, Dept Bldg Phys & Syst, Delft, Netherlands

[4] St Gobain Res Compiegne, Thourotte, France

[5] Richard Jack Build Test Solut, Lutterworth, England

[6] Univ Salford, Sch Sci Engn & Environm, Manchester, Lancs, England

关键词: Building energy performance;    On-site measurements;    Survey;    Heat transfer coefficient (HTC);    Building industry;    Performance gap;   

DOI  :  10.1016/j.rser.2021.111008

来源: Elsevier

【 摘 要 】

The heat transfer coefficient (HTC) is a very important factor influencing the energy performance of a building. Recent studies have shown the importance of on-site measurements of the HTC in reducing the performance gap in buildings. However, its measurement setup and calculation procedures are known to be intense and complex. Due to this, many stakeholders in the building industry find it impractical and insufficient for their needs. This paper presents the results of an international survey that targets such stakeholders with the aim to get their perspectives on HTC measurements on-site. Several stakeholders from 14 countries in Europe participated in the survey. The survey is categorized into four parts: a) basic data about the participants, b) their interest in methods for measured energy performance, c) their views on the characteristics of such a methodology and d) their concerns and opportunities. The results reveal that the stakeholders are highly interested in measuring the HTC on-site. The results also provide interesting insights on the aspects relevant for them and their customers. In particular, we elaborate on their perspective on the time to conduct the measurement, the cost of the setup, the measurement duration and the acceptable error. The assimilated understanding from the survey will help the building and the construction industry to identify opportunities for a progressive assessment campaign involving on-site measurements. This study is part of the International Energy Agency's Energy in Buildings and Communities Programme (IEA EBC) Annex-71 project titled 'Building energy performance assessment based on optimized in-situ measurements'.

【 授权许可】

Free