Techno-economic and uncertainty analysis of Biomass to Liquid (BTL) systems for transport fuel production

RENEWABLE & SUSTAINABLE ENERGY REVIEWS

卷:88

Review

Dimitriou, Ioanna¹  Goldingay, Harry²  Bridgwater, Anthony V.³ 

[1] Univ Nottingham, Fac Engn, Dept Chem & Environm Engn, Nottingham NG7 2RD, England

[2] Aston Univ, Sch Engn & Appl Sci, Comp Sci, Birmingham B4 7ET, W Midlands, England

[3] Aston Univ, Sch Engn & Appl Sci, European Bioenergy Res Inst, Birmingham B4 7ET, W Midlands, England

关键词: Biomass-to-liquid (BTL);    Gasification;    Fischer-Tropsch synthesis;    Synthetic fuels;    Techno-economic assessment;    Process simulation;   

DOI  :  10.1016/j.rser.2018.02.023

来源: Elsevier

【 摘 要 】

This work examines the technical and economic feasibility of Biomass-To-Liquid (BTL) processes for the manufacture of liquid hydrocarbon fuels. Six BTL systems are modelled and evaluated which are based on pressurised oxygen gasification of woody biomass, and specifically on circulating fluidised bed and entrained flow gasification systems. Three fuel synthesis technologies are considered: Fischer-Tropsch synthesis, methanol conversion followed by Methanol to Gasoline (MTG) and the Topsoe Integrated Gasoline (TIGAS) synthesis. Published modelling studies of BTL systems based on gasification have only used deterministic estimates of fuel production costs to assess economic viability without accounting for uncertainties of their model parameters. Unlike other studies, the present techno-economic assessment examines and quantifies the effect of uncertainty of key parameters on the fuel production costs. The results of this analysis show that there is a realistic chance (8-14%) of concepts based on Fischer-Tropsch synthesis meeting the cost of conventional fuels; that this probability could be increased to 50% with moderate tax incentives (an 8% reduction in the tax rate); but that deterministic estimates may be systematically underestimating likely production costs. The overall energy efficiency and production costs of the BTL designs evaluated range from 37.9% to 47.6% LHV and (sic)17.88-25.41 per GJ of produced fuels, respectively. The BTL concept with the lowest production costs incorporates CFB gasification and FT synthesis. The model deterministic estimates of production costs of this design indicate that a BTL process is not yet competitive with conventional refineries since the biofuel production costs are approximately 8% higher than current market prices. Large scale biofuel production may be possible in the long term through subsidies, crude oil price rises and legislation.

【 授权许可】

Free