Activity of chars and activated carbons for removal and decomposition of tar model compounds - A review

RENEWABLE & SUSTAINABLE ENERGY REVIEWS

卷:94

Review

Ravenni, Giulia¹  Sarossy, Zsuzsa¹  Ahrenfeldt, Jesper¹  Henriksen, Ulrik Birk¹ 

[1] Tech Univ Denmark DTU, Dept Chem & Biochem Engn, Frederiksborgvej 399, Roskilde 4000, Denmark

关键词: Gasification;    Biomass;    Char;    Active carbon;    Model tar;    Gas cleaning;   

DOI  :  10.1016/j.rser.2018.07.001

来源: Elsevier

【 摘 要 】

Chars, or carbonized products produced by pyrolysis or gasification, have a porous structure, a high specific surface area and they can be rich in micropores. Such characteristics make them suitable to be used in the cleaning of gasification producer gas. Several authors have been investigating the mechanism of the interaction between tar compounds and char, in order to understand the potential of this application. This review is aimed at summarizing results from reported experimental campaigns, carried out to study the effect of char beds on tar compounds: several research groups have been investigating the subject over the years, using different experimental methods and different chars or activated carbon (AC). After a first section dedicated to the definition of char and tars, this work reviews a series of studies where model compounds were used to predict the behavior of real tars upon contact with char surface. The review includes research works focused on alkanes decomposition (methane, propane) and more traditional aromatic model tars. The overview of the results shows that the use of biomass char is effective in converting up to 100% of model tars in a gaseous stream, with coke, H-2, and CO and CO2 as major products of cracking and reforming reactions. In particular, multi-ring aromatics such as naphthalene showed higher conversion rates. Tar conversion at 700-900 degrees C is favored by the presence of reforming agents (H2O, CO2), which also contribute in preserving the activity of char over time. Residual char properties that enhance the activity toward tar decomposition include a large surface area and a well-developed microporosity. Both the char properties and the process parameters need to be carefully optimized for the successful application of residual gasification char to producer gas cleaning, and further experiments on real producer gas are needed to implement char-based gas cleaning systems.

【 授权许可】

Free