Development and analysis of a model based on chirped fiber Bragg gratings employed for cracks characterization in materials

OPTICS COMMUNICATIONS

卷:426

Article

Mesa Yandy, Angelica M.^1,2  Duchowicz, Ricardo^1,2  Russo, Nelida A.¹  Cruz, Jose L.³  Andres, Miguel, V³ 

[1] Ctr Invest Opt CONICET CIC, Cno Centenario & 506, RA-1897 Gonnet, Buenos Aires, Argentina

[2] Univ Nacl La Plata, Fac Ingn, RA-1900 Buenos Aires, DF, Argentina

[3] Univ Valencia, Dept Fis Aplicada ICMUV, E-46100 Burjassot, Spain

关键词: Optical fiber sensors;    Modeling of sensors;    Chirped fiber Bragg gratings;    Fabry-Perot cavity;    Identification of material cracks;   

DOI  :  10.1016/j.optcom.2018.05.050

来源: Elsevier

【 摘 要 】

In this work a model was developed that allows to understand the behavior of a chirped fiber Bragg grating for the detection and characterization of cracks in materials. In addition to the amplitude response, we show that the group delay of the grating provides useful information for the characterization of the crack. The position of the crack can be determined thanks to the linear chirp of the grating that fixes a correlation between the spatial position and both, the wavelength and the group delay. However, our analysis shows that this simple approach has a source of error, which can be overcome if a controllable external strain can be applied to the embedded grating, additional to the strain generated by the embedding process. Thus, the width of the crack can be also estimated. The effect of the appearance of a crack on the grating generates simple o multiple transmission peaks that are analyzed considering the behavior of a Fabry-Perot fiber cavity. This simple model was experimentally tested and preliminary results were in good agreement with the simulations.

【 授权许可】

Free