Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites

POLYMER

卷:50

Article

de Menezes, Aparecido Junior¹  Siqueira, Gilberto¹  Curvelo, Antonio A. S.²  Dufresne, Alain¹ 

[1] Int Sch Paper Print Media & Biomat PAGORA, Grenoble Inst Technol, F-38402 St Martin Dheres, France

[2] Univ Sao Paulo, IQSC, BR-13560970 Sao Carlos, SP, Brazil

关键词: Cellulose;    Whiskers;    Nanocomposites;   

DOI  :  10.1016/j.polymer.2009.07.038

来源: Elsevier

【 摘 要 】

The surface of ramie cellulose whiskers has been chemically modified by grafting organic acid chlorides presenting different lengths of the aliphatic chain by an esterification reaction. The occurrence of the chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies, elemental analysis and contact angle measurements. The crystallinity of the particles was not altered by the chain grafting, but it was shown that covalently grafted chains were able to crystallize at the cellulose surface when using C18. Both unmodified and functionalized nanoparticles were extruded with low density polyethylene to prepare nanocomposite materials. The homogeneity of the ensuing nanocomposites was found to increase with the length of the grafted chains. The thermomechanical properties of processed nanocomposites were studied by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and tensile tests. A significant improvement in terms of elongation at break was observed when sufficiently long chains were grafted on the surface of the nanoparticles. It was ascribed to improved dispersion of the nanoparticles within the LDPE matrix. (C) 2009 Elsevier Ltd. All rights reserved.

【 授权许可】

Free