Polymeric nanocomposites made of a conductive polymer and a thermosensitive hydrogel: Strong effect of the preparation procedure on the properties

POLYMER

卷:78

Article

Martinez, M. V.¹  Bongiovanni Abel, S.¹  Rivero, R.¹  Miras, M. C.¹  Rivarola, C. R.¹  Barbero, C. A.¹ 

[1] Natl Univ Rio Cuarto, Fac Exact Phys Chem & Nat Sci, Dept Chem, Cordoba, Argentina

关键词: Polymeric nanocomposite;    Hydrogel;    Elastic module;    Polyaniline;    Semi-interpenetration;   

DOI  :  10.1016/j.polymer.2015.09.054

来源: Elsevier

【 摘 要 】

Nanocomposites are made by loading a conductive polymer (polyaniline, PANI) inside a thermosensitive hydrogel matrix (poly(N-isopropylacrylamide)-co-(2-acrylamido-2-methylpropane sulfonic acid), HG). The composites were obtained by two loading methods: i) in-situ polymerization of aniline inside the hydrogel matrix (ISP) and ii) by swelling of hydrogel in a true solution (SIS) of PANI (base) in N-methylpyrrolidone. Even though the composites have similar chemical composition, scanning electronic microscopy (SEM) shows different morphologies for each material obtained. ISP produces a material with segregated nanodomains of PANI inside HG, building a true nanocomposite (NC). On the other hand, SIS seems to create a semi-interpenetrated (semi-IPN) network of PANI inside the HG. The swelling capacity and volume phase transition temperature (VPTT) of composites are also affected by the loading methods. The segregated nanodomains of PANI in the NC do not affect the thermosensitivity of HG, while the PANI chains are directly interacting with the HG chains in the semi-IPN, affecting the VPTT. The swelling capacity of NC is of % Sweq - 6500 while the semi-IPN is of % Sweq - 8600. Both of them are lower than the one of pure HG (% Sweq = 11,000). The elastic module of both materials is higher than HG. The states of water analyzed by DSC show a high hydrophobic character inside the composite. The amount of water interacting with HG chains decreases with the presence of PANI. Both composites show electronic conductivity which changes when pressure is applied on them. However the NC shows a larger gauge factor. Such property could be applied in a pressure sensor. Additionally, the thermal sensitivity of the matrix is coupled with the electronic conductivity of PANI, allowing to build an electric switch controlled by the temperature. (C) 2015 Elsevier Ltd. All rights reserved.

【 授权许可】

Free