Improvement of meltdown temperature of lithium-ion battery separator using electrospun polyethersulfone membranes

POLYMER

卷:107

Article

Liu, Yang¹  Ma, Hongyang^1,2  Hsiao, Benjamin S.¹  Chu, Benjamin¹  Tsou, Andy H.³ 

[1] SUNY Stony Brook, Dept Chem, Stony Brook, NY 11794 USA

[2] Beijing Univ Chem Technol, State Key Lab Organ Inorgan Composites, Beijing 100029, Peoples R China

[3] ExxonMobil Chem Co, Global Chem Res, 5200 Bayway Dr, Baytown, TX 77520 USA

关键词: Battery separator;    Polyethylene;    Electrospun polyethersulfone membrane;   

DOI  :  10.1016/j.polymer.2016.11.020

来源: Elsevier

【 摘 要 】

Polyethersulfone (PES) electrospun nanofibrous membranes have been prepared and deposited on both sides of a microporous polyethylene (PE) substrate to fabricate a nanocomposite separator, which exhibits a high meltdown temperature (MDT) to prevent the thermal runaway within the battery under the condition of overcharging or abuse. To improve adhesion to electrospun PES nanofibrous membranes, the PE substrate with low surface energy and hydrophobic nature was etched with chromic acid and characterized with atomic force microscopy (AFM) and infrared spectroscopy (FTIR) techniques as well as the water contact angle test. Compared to the original film, the modified PE substrate showed a nearly 10-times increase in adhesive strength to the electrospun PES membrane. The morphology of the electrospun PES membrane, controlled by different electrospinning flow rates, was also demonstrated to have a substantial impact on adhesion, where a 5-fold increase of the adhesive strength was observed when the flow rate increased from 20 mu L/min to 60 mu L/min. The composite PES/PE/PES separator, structured as a PE substrate sandwiched in 2 electrospun PES membranes, maintained the low shutdown temperature (SDT) of 131 degrees C but achieved a significantly higher MDT of 221 degrees C. Furthermore, the high porosity of the electrospun PES membrane ensured that the air permeability of the separator was not sacrificed when compared with the original PE separator. (C) 2016 Elsevier Ltd. All rights reserved.

【 授权许可】

Free