Hydro-abrasive erosion in Pelton turbine injectors: A numerical study

RENEWABLE ENERGY

卷:130

Article

Messa, Gianandrea Vittorio¹  Mandelli, Simone¹  Malavasi, Stefano¹ 

[1] Politecn Milan, DICA, Piazza Leonardo da Vinci 32, I-20133 Milan, Italy

关键词: Computational fluid dynamics;    Discharge coefficient;    Hydro-abrasive erosion;    Pelton turbine injector;   

DOI  :  10.1016/j.renene.2018.06.064

来源: Elsevier

【 摘 要 】

Numerical simulations were performed to investigate how the design and the operation conditions of a Pelton turbine injector affect its vulnerability to hydro-abrasive erosion, alongside with its flow control capacity. Use was made of a Volume Of Fluid (VOF) model for simulating the free nozzle jet, a Lagrangian particle tracking model for reproducing the trajectories of the solid particles, and two erosion models for estimating the mass removal. The comparison against earlier studies and the experimental evidence, integrated with a careful sensitivity analysis, gave strength to the reliability of the numerical model. Nozzle seat and needle were the injector components most vulnerable to erosion. As the valve was closing, the erosion of the needle strongly increased, whilst that of the nozzle seat remained broadly constant. The influence of the injector design was also explored, suggesting that a reduction of the needle vertex angle is likely to enhance the risk of erosive wear. Finally, it was found that the possibility to condense the effects of the needle stroke and the needle vertex angle in a single parameter (i.e. the effective opening area) is no more allowed when hydro-abrasive erosion is considered, thereby assessing the need for case-specific wear prediction analyses. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free