Trailing-edge flow control for wind turbine performance and load control

RENEWABLE ENERGY

卷:105

Article

Chen, Hao¹  Qin, Ning¹ 

[1] Univ Sheffield, Dept Mech Engn, Mappin St, Sheffield S1 3JD, S Yorkshire, England

关键词: Flow control;    Microtabs;    Microjets;    Divergent trailing-edges;    Efficiency;    Load control;   

DOI  :  10.1016/j.renene.2016.12.073

来源: Elsevier

【 摘 要 】

This paper reports an investigation into the performance of trailing-edge flow control devices on horizontal axis wind turbines by solving the three dimensional Reynolds averaged Navier-Stokes equations in the rotational framework. The validation case selected for this work is the NREL Phase VI blade with wind tunnel experimental data. The trailing-edge flow control devices studied include microtabs and microjets installed near the trailing-edge of the rotating blade. The divergent trailing-edge is also included in the study as a passive flow control device due to its practical interest. These trailing-edge devices are implemented on the fixed-pitch NREL Phase VI blade, using the original performance and flow characteristics as a benchmark. Both 2D and 3D simulations are carried out in order to investigate the suitability of the 2D blade sectional design analysis and control for the actual 3D rotating blades. (C) 2016 Elsevier Ltd. All rights reserved.

【 授权许可】

Free