Optimization of breastshot water wheels performance using different inflow configurations

RENEWABLE ENERGY

卷:97

Article

Quaranta, E.¹  Revelli, R.¹ 

[1] Politecn Torino, DIATI Dept Environm Land & Infrastruct Engn, Corso Duca Abruzzi 24, I-10129 Turin, Italy

关键词: Micro-hydro;    Overflow weir;    Sluice gate;    Water mills;    Water wheels;   

DOI  :  10.1016/j.renene.2016.05.078

来源: Elsevier

【 摘 要 】

Breastshot water wheels are gravity hydraulic machines employed in low head sites. The scope of this work is to test the performance of a breastshot water wheel with two geometric inflow configurations: a sluice gate at different openings and two vertical overflow weirs. With the sluice gate, the maximum efficiency of the plant is 75%, constant over a wide range of flow rates, while the efficiency with the weir is increasing in the same flow rate range. Therefore, the wheel with the weir can exploit higher water volumes, and also it performs better at high power input. In practical applications, the inflow configuration can be effectively controlled to optimize the operative working conditions of breastshot water wheels, depending on the external hydraulic ones. The experimental results are also discussed in dimensionless terms, in order to support engineers in the design of similar breastshot water wheels. (C) 2016 Elsevier Ltd. All rights reserved.

【 授权许可】

Free