Material optimization of flexible blades for wind turbines

RENEWABLE ENERGY

卷:160

Article

Cognet, V¹  du Pont, S. Courrech²  Thiria, B.¹ 

[1] Univ Paris Diderot, Lab Phys & Mecan Milieux Heterogenes, PSL Res Univ, Sorbonne Univ,PMMH,UMR 7636,CNRS,ESPCI, Bat A,1er Etage,Case 18,7 Quai St Bernard, F-75005 Paris, France

[2] Univ Paris Diderot, Lab Matiere & Syst Complexes, UMR CNRS 7057, Sorbonne Paris Cite, Bat Condorcet,10 Rue Alice Domon & Leonie Duquet, F-75013 Paris, France

关键词: Wind energy;    Bio-inspiration;    Reconfiguration mechanism;    Optimization problem;    Energy saving;    Pitch control;   

DOI  :  10.1016/j.renene.2020.05.188

来源: Elsevier

【 摘 要 】

Bioinspired flexible blades have been recently shown to significantly improve the versatility of horizontal-axis wind turbines, by widening their working range and increasing their efficiency. The aerodynamic and centrifugal forces bend the blade along its chord, varying the pitch angle by means of non-consuming mechanisms. Here we introduce a general method based on a universal scaling, which finds the optimal soft materials for the blades to maximize the overall turbine efficiency or rotational power, for any required geometry of classical horizontal-axis turbines. The optimization problem, which depends on various parameters, such as the wind velocity, the rotation rate, the density, the rigidity and the geometry of the blade, is reduced to only two dimensionless parameters: the Cauchy number and the centrifugal number. The blade-element momentum theory is coupled to a torsion spring-based model for the blade deformation. Taking into account realistic incoming wind-velocity distributions in the North Sea and a large wind-turbine geometry, we found a significant increase of the total harvested power, up to + 35%. In addition, the optimal soft material corresponding to the maximal efficiency over the entire working range for a given wind turbine geometry is, within the limits of small blade deformations, scale-independent. Thus experiments on small wind turbines are a possible way to determine the optimal soft materials for larger ones. These flexible blades are found to be between 5% and 20% lighter than the current rigid blades. (C) 2020 Published by Elsevier Ltd.

【 授权许可】

Free