Ultrasonic pelleting of torrefied lignocellulosic biomass for bioenergy production

RENEWABLE ENERGY

卷:129

Article

Song, Xiaoxu¹  Yang, Yang¹  Zhang, Meng¹  Zhang, Ke²  Wang, Donghai² 

[1] Kansas State Univ, Dept Ind & Mfg Syst Engn, Manhattan, KS 66506 USA

[2] Kansas State Univ, Dept Biol & Agr Engn, Manhattan, KS 66506 USA

关键词: Densification;    Energy consumption;    Heating value;    Pelleting;    Torrefaction;    Ultrasonic;   

DOI  :  10.1016/j.renene.2018.05.084

来源: Elsevier

【 摘 要 】

Torrefaction has been explored to increase the heating value and hydrophobicity of biomass. Pellets made from torrefied biomass can be used as a high-quality feedstock in gasification and as a substitute for coal in power plants. One existing challenge is that pelleting torrefied biomass is more difficult under the same operating conditions as used for pelleting untreated biomass. To address this challenge, this study employed ultrasonic vibration as an assistance to densify torrefied wheat straw biomass into pellets. Biomass with different severities of torrefaction was produced. Pellet properties and pelleting energy consumption were investigated. It was found torrefied wheat straw biomass could be densified into pellets of good quality with the assistance of ultrasonic vibration; whereas, with the same pelleting pressure but without ultrasonic vibration, good pellets could barely be made. It was also observed that the densities of torrefied biomass pellets were lower than the untreated biomass pellets. However, pellets made from biomass torrefied at a higher temperature had a higher durability. It was also found the energy density and heating value were enhanced as the severity of torrefaction increased. In addition, the energy consumption for pelleting torrefied biomass was higher than untreated biomass under the same pelleting condition. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free