A discrete dislocation plasticity analysis of grain-size strengthening

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:400

Article; Proceedings Paper

Balint, DS ; Deshpande, VS ; Needleman, A ; Van der Giessen, E

关键词: discrete dislocations;    mechanical properties;    pure shear;    plasticity;    polycrystalline materials;    computer simulations;   

DOI  :  10.1016/j.msea.2005.02.082

来源: Elsevier

【 摘 要 】

The dependence of shear yield strength on grain size is analyzed using discrete dislocation dynamics. Plastic deformation is modeled through the motion of edge dislocations in an elastic solid. The lattice resistance to dislocation motion, dislocation nucleation, dislocation interaction with obstacles and dislocation annihilation are incorporated through a set of constitutive rules. Grain boundaries are modeled as impenetrable to dislocations. Single slip is assumed within each grain and a checkerboard-like arrangement of grains is used as a unit cell for the polycrystal. Doubly-periodic pure shear calculations are carried out for planar polycrystals with grain sizes in the range 0.2 mu m <= d <= 5 mu m and for two values of initial dislocation source density that differ by an order of magnitude. The offset flow strength varies with grain size, d, as d(-n), with n = 0.40 or n = 0.45, depending on source density. The value of the offset flow strength is higher for the low source density polycrystal. Furthermore, for each initial source density, the flow strength was found to scale roughly with dislocation density. (c) 2005 Elsevier B.V. All rights reserved.

【 授权许可】

Free