Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:356

Article

Lawrence, J

关键词: ordinary Portland cement (OPC);    high power diode laser (HPDL);    glazing;    contact angle;    wettability;    surface energy;   

DOI  :  10.1016/S0921-5093(03)00116-3

来源: Elsevier

【 摘 要 】

The elements governing modifications to the wettability characteristics of ordinary Portland cement (OPC) following high power diode laser (HPDL) surface treatment have been identified. Changes in the contact angle, theta, and hence the wettability characteristics of the OPC after HPDL treatment were attributed to: reductions in the surface roughness of the OPC; the increase in the surface O-2 content of the ceramic and the increase in the polar component of the surface energy, y(sv)(p). What is more, the degree of influence exerted by each element has been qualitatively ascertained and was found to differ markedly. Surface energy, by way of microstructural changes, was found to be by far the most predominant element governing the wetting characteristics of the OPC. To a much lesser extent, surface O-2 content, by way of process gas, was also seen to influence to a changes in the wettability characteristics of the OPC, whilst surface roughness was found to play a minor role in inducing changes in the wettability characteristics. (C) 2003 Elsevier Science B.V. All rights reserved.

【 授权许可】

Free