Microstructural and mechanical investigation of the near fusion boundary region in thermally aged 18MND5 / alloy 52 narrow-gap dissimilar metal weld

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:788

Article

Akhatova, A.¹  Robaut, F.¹  Verdier, M.¹  Yescas, M.²  Roch, F.²  Tassin, C.¹  Van Landeghem, H. P.¹ 

[1] Univ Grenoble Alpes, SIMAP, Grenoble INP, CNRS, F-38000 Grenoble, France

[2] Framatome France, Mat Chem & Technol Dept, 1 Pl Jean Millier, F-92084 Paris, France

关键词: Dissimilar metal weld;    Gas tungsten arc welding;    Low-alloy steel;    Nickel-based filler metal;    Hardness;    Phase transformation;   

DOI  :  10.1016/j.msea.2020.139592

来源: Elsevier

【 摘 要 】

Detailed characterization of the near fusion-boundary region of 18MND5/Alloy 52 dissimilar metal weld joints was performed to investigate the effect of thermal aging on the microstructure and mechanical properties and to quantify the diffusion of carbon into the weld metal. It was shown that the microstructural features of dissimilar metal welds, such as the size of the partially mixed zone in the weld and the adjacency to micro-segregations in the low-alloy steel have an effect on the peak carbon concentration in the enriched region of the weld. Aging conditions (time and temperature) influence the position of this concentration peak in the weld. Those trends were supported by thermodynamic calculations.

【 授权许可】

Free