Optimisation of compaction and liquid-state sintering in sintering and dissolution process for manufacturing Al foams

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:364

Article

Zhao, YY ; Han, FS ; Fung, T

关键词: compaction;    liquid-state sintering;    Al foam;    sintering;    dissolution process;   

DOI  :  10.1016/j.msea.2003.08.004

来源: Elsevier

【 摘 要 】

The effects of the compaction and liquid-state sintering conditions on the structure of the resultant Al foams manufactured by the sintering and dissolution process have been studied. The cell morphology and size of the final Al foam closely match those of the NaCl particles used. The foam porosity is 2-4% higher than the initial volume percentage of NaCl in the Al/NaCl powder mixture due to the contributions from green porosity and shrinkage. The microstructure of the Al matrix is characterised by an interconnected metallic framework with the presence of discontinuous interstices and fine voids as well as primitive particle boundaries in the cell walls. The optimum ranges of compaction pressure and sintering temperature are 200-250 MPa and 670-680 degreesC, respectively. Adding elemental Mg powder in the compacts has little effect on sintering. Adding elemental Sn together with Mg powders creates a densified Al matrix. (C) 2003 Elsevier B.V. All rights reserved.

【 授权许可】

Free